Search
OK
Cancel
中文  |  English  |  Русский
img
新闻中心
You are here now:
Home
/
/
/
Method for Determining the Position of the Rear Beam of KT800 High Speed Rapier Loom products

Method for Determining the Position of the Rear Beam of KT800 High Speed Rapier Loom products

  • Categories:Industry news
  • Author:
  • Origin:
  • Time of issue:2023-01-13 14:03
  • Views:

(Summary description)The position of the rear beam of KT800 High Speed Rapier Loom products has a certain relationship with the processing effect. Also, the handling requirements are different and the position of the rear beam used is also different. Then we need to know how to locate the rear beam of the KT800 High Speed Rapier Loom products.

Method for Determining the Position of the Rear Beam of KT800 High Speed Rapier Loom products

(Summary description)The position of the rear beam of KT800 High Speed Rapier Loom products has a certain relationship with the processing effect. Also, the handling requirements are different and the position of the rear beam used is also different. Then we need to know how to locate the rear beam of the KT800 High Speed Rapier Loom products.

  • Categories:Industry news
  • Author:
  • Origin:
  • Time of issue:2023-01-13 14:03
  • Views:
Information

  The position of the rear beam of KT800 High Speed Rapier Loom products has a certain relationship with the processing effect. Also, the handling requirements are different and the position of the rear beam used is also different. Then we need to know how to locate the rear beam of the KT800 High Speed Rapier Loom products.

KT800 High Speed Rapier Loom

  1. Woven fabric

  If KT800 High Speed Rapier Loom products are used for weaving yarn fabrics, the back rest should be adjusted as far as possible to the middle position so that the weaving process can be optimized.

  2. Weaving special spun yarn high density fabrics

  If a rapier is used to weave a fine, special yarn high density fabric, the back beam should be moved to the end to increase the warp tension. With the shed open, reduce the wrapping angle between the warp and the back beam. This effectively reduces friction and optimizes the smooth running of the weaving process by reducing the possibility of warp breakage.

  3. Weaving Roving

  For those who use KT800 High Speed Rapier Loom products to weave thicker special yarn fabrics, they should know that in this case it is important to move the back beam back so as to maintain an even tension to optimize when increasing the wrap angle fabric effect.

  We need to adjust the position of the rear beam according to the type of fabric that needs to be made, and pay attention to keep the position adjustment range of the rear beam within a reasonable range.

Keyword:

Related news:

Sales Hotline +86-0757-88855989
  • WeChat WeChat
  • Mobile website Mobile website
Guangdong kingtex weaving equipment Co., Ltd
Sales Hotline: 075788855989 Fax: 075788855990 E-mail:sale@kingtex.com Address: No.5 Yingchun Road, Yanghe Town, Gaoming District, Foshan City, Guangdong Province
KINGTEX

Scan QR code

Copyright © 2021

Guangdong kingtex weaving equipment Co., Ltd

All rights reserved.

language
中国
韩国
韩国
韩国
韩国
韩国